General Production – 2nd Shift

Duties/Responsibilities

• Pull parts required for powder coating from storage areas by looking at the Manufacturing Order (MO) and verifying the parts that are being hung are correct and contain all parts for that order
• Accurately count all parts and verify with work order
• Hang parts on the conveying system for powder coating
• If the hang up line for paint is full, move and take down parts and put into bins
• Pull parts via an overhead conveyor from the oven and stage parts on conveyor for assembly
• Inspect parts to make sure that they are completely painted and that there are no paint splatters
• Unload and move component parts off of the conveyor line.
• Take down parts that go to specific lines (e.g., triple lugs, latches, pivot blocks, bars, heads, L-brackets), count parts, and place them in the correct bins.
• Inspect all parts being assembled, both manufactured and purchased, for defects or poor quality, and ensure each product meets quality standards
• Inform Supervisor of any defects or quality issues
• Assemble components in the primary state of production
• Assemble products in the finished state of production
• Box finish product and ensure any literature or instructions are with the product
• May move product with a hand truck
• May move product with forklift – if certified
• Perform prescribed preventative maintenance on machines as required
• Collaborate with other team associates while simultaneously developing a team environment
• Follow detailed instructions, processes, and procedures
• Report problems with quality, processes, equipment, and materials to Supervisor
• Provide hands-on job function training to coworkers and new associates as needed
• Maintain the work area and equipment in a clean and orderly condition to facilitate manufacturing functions, and follow safety regulations